forbidden archeology

rSin · Post by **rSin** » Sun Nov 12, 2023 6:07 am

tibetian enclave reveals thousands of unread manuscripts waiting for curation...

dill786 · Post by **dill786** » Sun Nov 12, 2023 4:20 pm

The stone boxes of Saqarraa, Ben first introduced us to these a while ago, this vid is quite informative albeit its 5 years old

[youtube3uRJSrJdkvIdS5ep][/youtube]

dill786 · Post by **dill786** » Sun Nov 12, 2023 4:21 pm

The stone boxes of Saqarraa, Ben first introduced us to these a while ago, this vid is quite informative albeit its 5 years old
https://youtu.be/HNPpEHKqbks?si=s7sb-heDq3Eo2KlJ

rSin · Post by **rSin** » Mon Nov 13, 2023 5:48 am

we dont have the machines it would take today to reporduce these boxes.
anyone contacted speaks of this
to build would mean building new machines.

i wish these guys on sight would note the detail of inside corners termination
everything we use today is a cutting surface being rotated.
at some point they just cant reach any deeper into a corner

would really like to see the inside corner details of these boxes

ben ttech · Post by **ben ttech** » Mon Nov 13, 2023 5:53 am

so if you want a tight corner,
you break out the chisel and hammer to bash at what your spinning tool couldnt reach

the difference in finish would be obvious here

if the finish of these details isnt obviously dissimilar the evidence of a tool for cutting stone we dont presently know of is obvious

rSin · Post by **rSin** » Mon Nov 13, 2023 9:26 pm

so i got around to finishing the video

it reports that these inside corners have a radio of of 5/32nd

that a quarter inch and one 16th

thats a reasonable product of a steel chisel
nothing copper could have done

and they tell us this boxes were for enterning oxen,
why square the corners?

the video addresses this well

traditional eqyptology is a house of cards and needs showing the door.
mabe we get somewhere

actually addressing the fact no tools that could have done this work have ever been found...

rSin · Post by **rSin** » Tue Nov 14, 2023 8:43 pm

rSin · Post by **rSin** » Tue Nov 14, 2023 9:34 pm

those lugs for ropes really present a crazy problem for their manufacture,
of course if you had percision lathes you cut the vase with a buldge around them in its shape,
but how to you cut away what the lathe tool couldnt reach for 90% of in circumference and still maintain perfections of 2 thousandths???

we would have to custom build machining tools to do this were anyone willing to pay for their creations today.
and even if ordered it wouldnt be easy,
3d precision machining isnt really a thing
we design soas to never need to do it most of the time

crazy...

rSin · Post by **rSin** » Thu Nov 16, 2023 8:19 pm

Intrinsic · Post by **Intrinsic** » Sat Nov 18, 2023 2:47 pm

Ummmm the vid doesn't work.