Tokalot VI
-
rSin
- Karma Hippie
- Custom Title: world where everone gets
- Location: neck deep
- Has bestowed Karma : 1622 times
- Received Karma : 1009 times
- Posts: 7158
- Joined: Fri Mar 26, 2010 8:12 pm
Tokalot VI
if he was two faced we'd have learned about it along time ago...
the intolerance of the old order is emerging from the rosy mist in which it has hitherto been obscured.
-
dill786
- Kosmic Karma
- Custom Title: memento mori
- Has bestowed Karma : 811 times
- Received Karma : 637 times
- Posts: 1243
- Joined: Sat Oct 14, 2017 1:45 am
Tokalot VI
even if its all bollocks looks like they got to him now, with 4 allegations against him... gonna be hard for him to make a comeback
-
rSin
- Karma Hippie
- Custom Title: world where everone gets
- Location: neck deep
- Has bestowed Karma : 1622 times
- Received Karma : 1009 times
- Posts: 7158
- Joined: Fri Mar 26, 2010 8:12 pm
Tokalot VI
i dont follow him but he shows up and hes really taken a stinging tongue to entrenched power the world over.
no doubt the secret armys have had it out for him
the teen was legal in brittian.
havnt caught the other accusations
no doubt the secret armys have had it out for him
the teen was legal in brittian.
havnt caught the other accusations
the intolerance of the old order is emerging from the rosy mist in which it has hitherto been obscured.
-
Lrus007
- Advanced Grower
-
Karma Bhudda
- Custom Title: hash and oil maker
- Has bestowed Karma : 934 times
- Received Karma : 1479 times
- Posts: 2722
- Joined: Wed Sep 23, 2009 3:21 pm
Tokalot VI
i am really into geology. also prospecting, rock hounding ect.
well got myself a toy. bought it to copycat one same size and
one smaller. was handle i was not sure how to make. i notice
that there handle is made in house. back to thinking..
is a crevice sucker much like a large syringe. no mater if your
zoro with a shovel. you will not get a crack clean all the way.
so together.
has rubber gasket you can loosen or tighten with a wing nut.
then the front is a 1" tube 45º that slides on.
i will drill and put a screw in front of 1" tube. to keep it from
getting a rock stuck into it. thought i would share
well got myself a toy. bought it to copycat one same size and
one smaller. was handle i was not sure how to make. i notice
that there handle is made in house. back to thinking..
is a crevice sucker much like a large syringe. no mater if your
zoro with a shovel. you will not get a crack clean all the way.
so together.
getting a rock stuck into it. thought i would share
My therapist says I am a habitual liar and an attention seeker, therefore nothing I say/write is true and under no circumstances should I be believed nor held accountable for anything I say. all photo's are paintings
People are born with the instinct to fight against their own death, to struggle with their last breath against even the most unavoidable and uncompromising ends.
People are born with the instinct to fight against their own death, to struggle with their last breath against even the most unavoidable and uncompromising ends.
-
rSin
- Karma Hippie
- Custom Title: world where everone gets
- Location: neck deep
- Has bestowed Karma : 1622 times
- Received Karma : 1009 times
- Posts: 7158
- Joined: Fri Mar 26, 2010 8:12 pm
Tokalot VI
rad shit smokes!
their using wheels on either side of a sheet of steel to squish out complex shapes with overhands difficult to manufacture traditionally.
their using wheels on either side of a sheet of steel to squish out complex shapes with overhands difficult to manufacture traditionally.
the intolerance of the old order is emerging from the rosy mist in which it has hitherto been obscured.
-
rSin
- Karma Hippie
- Custom Title: world where everone gets
- Location: neck deep
- Has bestowed Karma : 1622 times
- Received Karma : 1009 times
- Posts: 7158
- Joined: Fri Mar 26, 2010 8:12 pm
Tokalot VI
very cool to hear engineers parse down into words things i just understand but would struggle to describe...
but the word here is squish
and as it happening in steel plate the nibleness of the force applying points to measure then deformations their creating as they inches throught the work micrometer by micrometer...
but the word here is squish
and as it happening in steel plate the nibleness of the force applying points to measure then deformations their creating as they inches throught the work micrometer by micrometer...
the intolerance of the old order is emerging from the rosy mist in which it has hitherto been obscured.