I have a new vacuum pump.

jesus · Post by **jesus** » Tue Dec 09, 2014 9:09 pm

How'd you do them?

Dick Fein · Post by **Dick Fein** » Tue Dec 09, 2014 10:32 pm

It's a Pure pen.
A little vaporiser that has a usb charger.
They look like just another e cigarette.

Dick Fein · Post by **Dick Fein** » Tue Dec 09, 2014 11:05 pm

https://www.youtube.com/watch?v=n5vLosrRecw" onclick="window.open(this.href);return false;
I do not know this reviewer but he is right on about Pharma bee.

jesus · Post by **jesus** » Tue Dec 09, 2014 11:29 pm

Doing the extract on frozen fresh bud really made a difference to me.

jesus · Post by **jesus** » Tue Dec 09, 2014 11:31 pm

ps the vape pens are ok but you gotta try a huge hit

edit: if you havent

Lrus007 · Post by **Lrus007** » Wed Dec 10, 2014 12:12 am

Dick Fein wrote:I did a couple of dabs tonight and it has become incredibly sticky.
It is on parchment paper and I am keeping it in the freezer.
I bought a hot air gun to make it harder but I might just put up with the stickiness.

well it will pick up moisture in the freezer is why it's sticky.
the best hard oil is left out in open air covered for a few weeks.
but since you bought a ronald jeremy pump and plan to use it.
take bho then after it has somewhat dried add everclear it will
bubble as the butane breaks it's bond. then you can winterise and
filter if you wish. doing so will make a more oily oil but cleaner.
then put into your vacuum chamber. heat can be added, try to not
go over 120º F. you are at this time evaporating the everclear the
butane is gone from oil at this point. after let oil air dry a while. breaking
the top layer so more of the oil has a chance to dry.
now for those of us that do not have a vacuum chamber. the way to
make a faster solid is in a corning dish. heat dish to 120º and lay a thin layer of
oil across it then let it cool a few hours then blade it off dish. then
collect it up and let it air dry. this will make a solid oil also.

the best way is time... few weeks, a month or longer loosely covered in open air....
breaking the top layer every so often to expose oil to air as it skins over.
hope this helps and good luck
Lrus007

Dick Fein · Post by **Dick Fein** » Wed Dec 10, 2014 12:19 am

I can't get everclear here, unfortunately.

bentech · Post by **bentech** » Wed Dec 10, 2014 12:33 am

othere stuffs nearly as proof

anyone ever heard of the trace butane producing a burn out or explosion in their evacuative rigs?

Lrus007 · Post by **Lrus007** » Wed Dec 10, 2014 12:50 am

Dick Fein wrote:I can't get everclear here, unfortunately.

well if you are not going to eat it 99% isopropyl alcohol works
just as well. that should be at your local RX might have to ask.
Lrus007

deran · Post by **deran** » Wed Dec 10, 2014 1:37 am

or methanol