Page 1 of 1

Just canna talk

PostPosted: Sun Aug 23, 2020 8:35 am
by Oldjoints
Two years ago I bought a turboklone cloner. It leaked from day 1 and never sprayed the outer rows properly. There was also no way to properly clean the manifold. So I built my own cloner (pictures below). I cut out the bottoms of the net pots so I could use larger clones and really only needed the net pots to use to firmly seat the collars. I also installed 2 large air stones in the water for aeration and movement.
And while I was at it I bought a few clones, I wanted some flavor so why I picked these strains:
( pictures below)



Zskittlicous (Exotic seeds)

Blueberry (Dutch passion)

Raspberry Cough (local dispensary)

Blueberry Headband (Humboldt Seeds)

Just canna talk

PostPosted: Sun Aug 23, 2020 12:55 pm
by rSin
You must keep sizeable mothers to feed that bin the large clones you prefer. How long do those airstones last you?

Just canna talk

PostPosted: Sun Aug 23, 2020 1:13 pm
by Oldjoints
The air stones will last years, the ones I use are for fish aquariums and about a foot long.
I would love to keep mothers but when you can legally only have so many plants in veg space in my veg room gets valuable so it’s easier to keep the strain going and clone from what I have in veg.

Re: Just canna talk

PostPosted: Wed Aug 26, 2020 12:11 am
by Lrus007
made a few spray bars over the years. pvc is nice you can thread with
a drill. nice looking plants best of luck.

Just canna talk

PostPosted: Fri Aug 28, 2020 8:23 pm
by deran
Oldjoints wrote:The air stones will last years, the ones I use are for fish aquariums and about a foot long.
I would love to keep mothers but when you can legally only have so many plants in veg space in my veg room gets valuable so it’s easier to keep the strain going and clone from what I have in veg.


i wonder if you have thought of grafting cutz to one mother, i.e having 4 genetics (or more) on one plant, that would be a shortcut when numbers are important

at least its worth a try, i came across such thoughts when thinking of males and "sqeezing" em into smaller "units" , as you know, when seeding mothers, its often a help having more than 1:1 matings


also im curious how efficient this method is , with some pics, go go go buddy :)

Just canna talk

PostPosted: Sat Aug 29, 2020 8:30 am
by Oldjoints
i wonder if you have thought of grafting cutz to one mother, i.e having 4 genetics (or more) on one plant, that would be a shortcut when numbers are important

at least its worth a try, i came across such thoughts when thinking of males and "sqeezing" em into smaller "units" , as you know, when seeding mothers, its often a help having more than 1:1 matings


also im curious how efficient this method is , with some pics, go go go buddy :)


I know others have done this: https://m.youtube.com/watch?v=QDO0wynsffI
But I have never tried with cannabis, I did try grafting fruit trees many years ago but I was not very successful in the attempt

Re: Just canna talk

PostPosted: Fri Nov 13, 2020 11:07 pm
by ~Uncle Ben~
Bump

Re: Just canna talk

PostPosted: Wed Nov 18, 2020 12:44 am
by Jesús Malverde
I've got a four-way pear tree, it's nice. Has anyone done grafting different cannabis varieties together before? I don't see why it wouldn't work.

Re: Just canna talk

PostPosted: Wed Nov 18, 2020 1:24 am
by bentech
once this friends brought some seeds back from amsterdam
never seen as thick of stalks as whatever it was hed bought

i made emitters running gold screws down into a countersunk hold in 40 schedule pvc

Just canna talk

PostPosted: Wed Nov 18, 2020 4:10 am
by Oldjoints
Jesus, go to the link in my above post.